7mm EPDM Rubber Cap

EPDM Rubber Caps are a popular product chosen for covering pins, studs, rods and wires during finishing operations and assembly

The 7mm EPDM Rubber Cap is a simple device. There’s a comprehensive list of uses for a 7mm EPDM Rubber Cap, from general protection to aesthetic finishing, from masking during powder coating to electrical and anti-vibrational insulation. Because the product is so simple, the applications customers use them for are endless.

EPDM rubber as a material has many useful qualities. You undoubtedly come into contact with it on a daily basis throughout most aspects of your activities. Read more about EPDM

7mm EPDM Rubber Cap is a popular choice covering 7mm Studs and screws during finishing operations and final finish.

The 7mm EPDM Rubber Cap is suitable for many applications, from general protection to high temperature masking. Customers can buy a range of sizes off the shelf at AFAC. EPDM rubber caps are black.

EPDM (ethylene propylene diene monomer) synthetic rubber  is an elastomer with a variety of applications and manufacturing methods.

Manufactured from EPDM, EPDM rubber caps are ideal for masking up to 160•c. The high temperature resistance means they can be re-used over and over. When used as rubber caps, the EPDM Rubber cap is simply pushed over the stud or pin requiring masking. As a plug, it is often best to push the EMDP Rubber caps into the hole to be masked, using a radiused end insertion tool, or on larger sizes, the end of a pencil or pen. After processing, the EPDM Rubber cap is simply removed, while the component is still warm. Any coating build up can be removed manually, or in a rumbler.

When using the 7mm EPDM Rubber Cap for general protection or aesthetic use the cap is fitted securely and remains in place.

Masking / Protection Caps also available in Silicone Rubber where higher stoving temperatures are required, more information here: 074A | Silicone Rubber Caps