8mm Silicone Cap 25mm Long | 074A-07.90-25WH

£0.08

M8 Silicone cap are a dual purpose masking device that withstand up to 315ºC.

They can be used to mask rods, bars and pins, but can also be used as plugs to mask threaded and plain holes.
Ideally suited to:

  • 8mm x 25mm long
  • Bagged in 100’s
  • 315°C | 600°F
  • Colour coded for sizing
  • Powder Coating | Cerakote® | Anodising | Electroplating
  • Silicone Rubber

These caps are suited to unthreaded 8mm diameter rod or bar.

2600 in stock (can be backordered)

Description

8mm Silicone Cap

8mm Silicone Cap

 

The 8mm silicone cap are simple device. There’s a comprehensive list of uses for a silicone cap, from general protection to aesthetic finishing, from masking during powder coating to electrical and anti-vibrational insulation. Because the product is so simple, the applications customers use them for are endless.

Silicone rubber as a material has many useful qualities. You undoubtedly come into contact with it on a daily basis throughout most aspects of your activities. Read more about Silicone Rubber here

8mm Silicone Cap is a popular choice covering 8mm pins, rods and wires during finishing operations and final finish.

8mm Silicone cap are suitable for many applications, from general protection to high temperature masking. Customers can buy a wide range of sizes off the shelf at AFAC. Our stocks are generally colour coded for size but customers can also choose to have custom colours made to order.

Technical Information
Manufactured from BAKEWELL silicone rubber, the 8mm silicone cap is ideal for masking during electro-static powder coating, stove enamelling, E-Coat, plating and anodising. The high temperature resistance means they can be re-used over and over. When used as rubber caps, the 8mm silicone cap is simply pushed over the stud or pin requiring masking. As a plug, it is often best to push the Silicone Rubber caps into the hole to be masked, using a radiused end insertion tool, or on larger sizes, the end of a pencil or pen. After processing, the Silicone Rubber cap is simply removed, while the component is still hot. Any coating build up can be removed manually, or in a rumbler. Popular sizes are colour coded to assist in selection and identification. The table shows the range available and what parts best suit the threads to be masked.