M3 Silicone Rubber Cap 12mm long | 074A-02.80-12YW

£0.03

M3 Silicone Rubber caps are a dual purpose masking device that withstand up to 315ºC.

They can be used to mask rods, bars and pins, but can also be used as plugs to mask threaded and plain holes.

Ideally suited to:

  • 2.8mm ID x 12mm long
  • 315°C | 600°F
  • Colour coded for sizing
  • Powder Coating | Cerakote® | Anodising | Electroplating
  • Silicone Rubber

20000 in stock (can be backordered)

Description

M3 End Cap | Silicone Rubber

BAKEWELL M3 end Caps are one of the most popular products chosen for covering pins, studs, rods and wires during finishing operations and assembly

The M3 end cap is a simple device. There’s a comprehensive list of uses for an M3 end cap, from general protection to aesthetic finishing, from masking during powder coating to electrical and anti-vibrational insulation. Because the product is so simple, the applications customers use them for are endless.

Silicone rubber as a material has many useful qualities. You undoubtedly come into contact with it on a daily basis throughout most aspects of your activities. Read more about Silicone Rubber here

The M3 end Cap is a popular choice covering M3 Studs and screws during finishing operations and final finish.

The M3 end cap is suitable for many applications, from general protection to high temperature masking. Customers can buy a wide range of sizes off the shelf at AFAC. Our stocks are generally colour coded for size but customers can also choose to have custom colours made to order.

Silicone Rubber caps are suitable for many applications, from general protection to high temperature masking.

Manufactured from silicone rubber, M3 end caps or BAKEWELL CAPLUGS are ideal for masking during electro-static powder coating, stove enamelling, E-Coat, plating and anodising. The high temperature resistance means they can be re-used over and over. When used as rubber caps, the CAPLUG is simply pushed over the stud or pin requiring masking. As a plug, it is often best to push the Silicone Rubber caps into the hole to be masked, using a radiused end insertion tool, or on larger sizes, the end of a pencil or pen. After processing, the Silicone Rubber cap is simply removed, while the component is still hot. Any coating build up can be removed manually, or in a rumbler. Popular sizes are colour coded to assist in selection and identification. The table shows the range available and what parts best suit the threads to be masked.